What You Should Know About the Tooth Implant Industry?
The last 10 years have seen incredible technological advances in dental. Tooth Implants have been the preferred method to replace missing or damaged teeth. When done under proper surgical technique and with proper surgical technique, the rate of success has exceeded 95 percent. In the 1960s an orthopedic surgeon called P.I. introduced the idea of osseointegration (or the fusion of bone and titanium) to the dental field. Branemark was the first person to adapt the procedure to dental use. However, the implementation of the procedure in a dental setting was seen as risky and unpredictably. At the time there was a low chance of success. 55-60 percent. Many dentists believed the introduction of these prostheses into the treatment plans of patients was too early for an established outcome. In order to increase the success rate, modifications to the Tooth Implant’s surface were implemented. However there was no solid scientific evidence to support the claims of the manufacturer that they had more successful rates. Through years of empirical testing, a titanium Implant was developed that looked much like that of a natural tooth’s root.
Some 40 years later, technological advancements in the Tooth Implant field has facilitated their colloquial use among general dentists and specialists. Implant dentistry was booming in the past decade and many implant companies altered the topographic surface of their implants to gain market share. They also boasted higher rate of success, despite not being in a position to prove it.
There’s a lot of undocumented research employed in dentistry, with false claims of greater success rates. Implant manufacturers often make changes to their implants to respond to higher success rates when compared in comparison to other designs. As the Tooth Implant industry growing each year, this problem will not go away.
As a potential implant candidate There are a few points you should be aware of the industry before continuing with treatment:
Fact: Tooth Implants can be implanted by doctors without the need for formal surgical education.
One implant manufacturer provides education seminars to dentists who wish to put Tooth Implants in a matter of days. In just two days, doctors will receive the certificate that proves they have been trained in the field of surgical implant dentistry. They could also be able to place Dental Implants on patients. The course doesn’t train doctors to treat human beings instead, but to treat jawbones that are made of plastic.
Fact It is the case that the US government doesn’t need FDA approval for a Tooth Implant fixture to be marketed to the professional community.
The US government has a governing body that supervises biomedical device integration in the dental or medical community. If, for instance, the Tooth Implant meets certain criteria that are required for the surgical placement of the device into the human body Based on previous submissions made by other manufacturers who have tested the device and approved it, the regulatory body will grant an 510K approval to the implant manufacturer. Tooth Implant manufacturers and other makers of biomedical products can market their product without needing to undergo human or animal tests. If a biomedical device is developed with the same purpose it can be used to formalize the 510K clearance.
FACT: So many implants, so little time.
The battle for the Tooth Implant market is fierce as patents expire on devices that have been found to be safe to be used by humans, a few implant makers will copy the designs of these devices. Implant manufacturers seeking a spot within the competitive Tooth Implant market will copy the appearance of the implant that has an expired patent with the exception of a small change every now and then. Implants are also referred to as clones and are marketed to dentists at a significantly discounted price. Implant clones are nearly always without any clinical documentation which can verify the claims made by their makers. The companies are actually using documentation from the manufacturer of the implant they’re copying!
FACT: Implant manufacturers are introducing new designs to the market with false claims
To keep up with new implant makers that have greater overall success Some companies duplicate a specific part of their competitor’s implant and claim that the results are comparable with the newly added part. While this may be true, often implant makers are more successful because of a combination of design features. Implant makers can keep their existing clientele by introducing a concept of design that has been shown to increase success rates in different types of implant systems even if there’s no clinical evidence. Doctors do not have to be concerned about purchasing a new implant system.
In reality, clone companies regularly falter and lose market share, which results in being removed from the market.
Tooth Implants are made of metals and suffer from fatigue. There are a lot of implant manufacturers that have cloned other systems with adequate documentation for clinical use have failed and as a result, can no longer offer their product to the dental industry. It is often difficult, or almost impossible to locate replacement parts for these implant systems when they fail. It could leave the patient who had a cloned implant placed within their jaw with the unfortunate situation of not being able restore it.
FACT A FACT: The US FDA doesn’t demand that dentists inform patients of the kind of Tooth Implant they are placing.
There are more than 90 Tooth Implant manufacturers currently competing for market share in the United States; within these 90 or so implant makers over 340 different implant designs are offered. !!!! The number of options is growing, and dentists may have a difficult time identifying the type of implant placed.
What can you do to avoid these problems?
Investigate the dentist who will recommend the implant. Also, be sure you ask if the dentist has experience in implant dentistry.
Be sure that the person installing the Tooth Implant has surgical experience from an accredited specialist program or an extensive surgical training course that includes proper instruction.
Talk to a prosthodontist or general dentist before you have the implant placed. This will ensure that the implant tooth is treated properly and is properly restored.
Ask your dentist which kind of Tooth Implants he or she uses during your first consultation. Find out how much research has been completed on that particular type of implant, and its rate of success and longevity.
Finally, speak to your doctor in detail and ask questions about the type of implant put in and the justification for the choice of implant.